Boy that could mean so many things…a new boat — na.  A new dinghy — na.  A new car — na.  We literally mean a new set of wheels.  But why do we need wheels on a boat?  Well, we don’t “need” wheels but we got them for our dinghy.

Many cruisers use wheels to help them pull their dinghy onshore during a beach landing.  Our previous dinghy was soooo heavy. We could have used dinghy wheels for her but she was too heavy for the wheels.  Yes, the wheels have a weight restriction.

But, our new Highfield 360CL weighs in at 75 kilos, the outboard weighs 55 kilos and we carry about 15 kilos in fuel for a total of 145 kilos.  Just the right amount of weight for a set of new wheels.

Which Wheels to Buy?

There are lots of different types of wheels on the market and we really had to do our due diligence.  We made sure they would accommodate our dinghy’s make, model, and weight while still being able to work in hard and soft sand.  Beachmaster consistently came up as the top brand. 

Matt emailed them to make sure they would work and hold up with our set up and we received an affirmative reply.  We ordered the removable mount set with retractable wheels.  We wanted to be able to take them off if we were not planning on using them for a while.

Matt placed the order on Thursday.  On Friday we received a call from Beachmaster asking if we were a foreign flagged vessel and I said “yes.”  She then asked if the wheels were being installed onto our dinghy which would be leaving the country with us, I said “yes.”  And then she said, I will then send you a new invoice as the original invoice charged you for GST (tax) and you qualify for a GST (tax) free order.  

What?  Yes, that is absolutely true.  Normally, both Matt and I automatically request GST free so I assumed he did on this order.  But he forgot.  So, the company proactively realized this and reached out to us to credit us the GST!  Seriously an amazing company.

Drilling Holes Into Our New Dinghy

The package arrived on Monday (1 business day after placing the order).  Talk about service.   We measure multiple times, tape off the area, and measure again.  We then put them up with VHB double stick tape so we could raise and lower the wheels without hitting the rub rail.  Then we drilled the holes into the transom.

The top photo shows he wheels down and the bottom photo shows the wheels up.

It took two of us to drill the holes so no photos.  Once the bolt holes were drilled, Matt taped them off and filled them with 5200 so they would not leak.  Then we installed each side.

Here are the final photos.  The before (upper left), installed and up (top right), installed and down (bottom left).

Now all we need is a beach to try them out!

Our blog posts run 10-12 weeks behind actual live events.  This blog post occurred around mid-January 2024.  In our last post we spend a lot of time redoing our dinghy chaps which came unglued.