Category Archives: Boat Details

Marina Pez Vela

Sweetie Gets A Clean Bottom-Boat Chores

The yard at Marina Pez Vela is really nice.  However, as with most things that sit outside for an extended period of time, the boat gets really, really dirty.  So, in between managing our insurance claim, we have been busy working on lots boat chores.

Marina Pez Vela

Marina Pez Vela

Everything had to be removed from under our settees to enable the workers access to our house batteries, inverter/charger, COIs, and switches.  So, all of those items were moved to our master head.  In addition, the beds had to be opened up to get to the carts and bilge pumps, and cabinets had to be emptied to get to the fridge and freezer pumps.  All of that “stuff” plus our settee cushions that are normally stowed are now stuffed in other places.

It’s heartbreaking to see your home in such disarray.  So, we do what we can to keep it clean and organized as much as possible.

Before and After Photos

The salon photo below was taken “before” we put some nice artwork up behind the settees, but you get the general idea of how clean we keep our boat on a daily basis.  The bottom photo has all cushions removed, and our two sails (main and jib) in the salon.

Salon before and after photos

Salon before and after photos

The master cabin before photo was again taken before we put up our beautiful artwork.  The after shot has the bed folded up for easy access to equipment underneath.

Master cabin before and after

Master cabin before and after

I love our starboard master head because it is roomy, white, and breezy. Sometimes it is the coolest place inside the boat.  We keep it spotless because that is just how we are, but now it is stacked with stuff.

Master Head (Bathroom) before and after

Master Head (Bathroom) before and after

The port aft cabin is a office / cabin.  Typically we use this room as our “work room” so we may have some tools and our sewing projects out if we don’t have guests.  Now it is a bit of a disaster with stuff coming out of all areas.

Office / Cabin Before and After

Office / Cabin Before and After

The port forward cabin is full of our salon settee cushions

Port Forward Cabin After

Port Forward Cabin After

A few of the boat projects we have completed while on the hard….waiting.  Most of these chores or projects have been done two or three times due to the mold and constant mess from various workers.

All this work, on top of managing the insurance claim, three vendors, large budget, shipment of parts, visa renewals, extended cruising permit, Galapagos permit, and long stay visa for French Polynesia – good thing I’m a project manager.

Interior Chores:

  • Wiped down all surfaces to remove dirt, dust, mold
  • Cleaned all interior wood work and apply Howard Feed & Wax BeesWax
  • Removed mold with bleach and apply Concrobium Mold Control
  • Aired out all closets, cupboards, drawers
  • Removed silicone from ceiling panels and ceiling (access solar cables)
  • Cleaned and wipe down all bilges
  • Cleaned all areas of debris after workers left, daily

Mold grows within weeks of being clean as it rains every day here creating a great breeding environment.  So, you have to stay on top of it.

Exterior Chores:

  • Scrubbed teak hatches, sugar scoops, and swim ladder steps.  Then apply Star brite Teak Oil.
  • Restored all stainless steel by cleaning with ospho
  • Removed and replaced silicone around front & back bimini rails and around bimini port, back, starboard wood accents.
  • Cleaned up both props using muradic acid (smelly job) see photo below
Cleaning props with muradic acid

Cleaning props with muradic acid

  • Scrub both sides of all three sunshades that were covered in dirt and muck after a few months on the hard in the yard.  Had to do this twice due to the excessive dirt.
Cleaning the Sunshades

Chores: Cleaning the Sunshades

Scrubbed, sanded, and applied Star Brite Teak Oil on all exterior wood accents.

Wood accents chores

Wood accents chores

The bottom of the dinghy is always a challenge to clean.  Most cruisers will take her to a beach, flip her over and clean with sand and soapy water.  However, our outboard is so big and heavy that we cannot taker it off/on easily, so we cannot flip “Sweetie” over.

With the boat on the hard and the outboard on the stanchion, we could easily flip her over so I could clean her bottom.  This was not nearly as bad as many other dinghies we’ve seen, but this was bad for “Sweetie.”  Using a lot of elbow grease, soapy water, scrub brush and “On Off” on the fiberglass hull she came clean after 6 hours of hard labor.

Sweetie's Bottom job

Sweetie’s Bottom job

We left our helm seat cushions out for a comfortable place to sit and within a few weeks we had mold.  It rains here every day, for hours.  So, they had to be scrubbed clean before being stowed inside.  No more cushions outside.

Helm cushions moldy from rain.

Helm cushions moldy from rain.

Matt has been extremely busy as well.

  • Cleaning both engine rooms
  • Re-welded Starboard engine mount that holds alternator
  • Repaired leak in dinghy pontoon using Inland Marine’s Sealant Kit
  • Removed several ceiling panels to access solar panel wiring
  • Replaced big and small zincs on both props
  • Scrubbed down the topsides (over and over and over again)
  • Cleaned and lubed both props
  • Used ospho on stainless on the mast (since it is down and easy to reach and clean)
  • Cleaned out all storage areas.
  • Repaired two drain fittings that were leaking

Check out these clean props, freshly lubed and sporting new small and large zincs!

New Zincs on Both Props

New Zincs on Both Props

We removed our SSB plates to clean them.

Keel Coolers and SSB Plates Maintenance

Keel Coolers and SSB Plates Maintenance

Since we have been waiting to finish up this claim, we have had 5 months to do chores.  Since, I first wrote this post, we have completed more boat chores … at least we will be busy while we wait:

  • Created pattern to replace damaged ceiling panel in master state room
  • Cleaned and prepped ceiling area for new ceiling panels (three panels in master and 1 panel in office)
  • Applied VHB tape to ceiling panels and put them back up (4 months later)
  • Sewing projects: repaired wench covers, dinghy fuel tank cover, sail bag, hat.
  • Sewing project: created new sunbrella cockpit covers to keep the rain out
  • Cleaned wench handle holders
  • Repeated all projects above for Christine on Interior and Exterior before launch

New Boat Cards and Stickers

On the plus side, we did manage to create new boat cards and stickers.  We often trade boat cards with other cruisers so we can stay in touch as we travel.  These are much cleaner, with more information, and has a fabulous photo of us.

Sugar Shack Boat Cards

Sugar Shack Boat Cards

Matt created two designs for our boat stickers.  We ended up going with the top graphic with images.  Lots of places let you put your sticker up at their establishment which is fun to represent Texas.

Sugar Shack Stickers

Sugar Shack Stickers

Sugar Shack on the Hard in Marina Pez Vela.  Her boom lies across her bow, her mast is on the ground behind her and all her sails, rigging, sail bag, spreaders, etc…are down.   She desperately needs a new bottom job (even though her current one is less than 18 months young)…the elements will do that to your ablative paint.

Sugar Shack on the Hard MPV

Sugar Shack on the Hard MPV

View from Unit 7 at Manuel Antonio Estates

Manuel Antonio Estates: Short-Term Rental

How did we end up living with the monkeys at Manuel Antonio Estates?  Well, Sugar Shack was struck by lighting (a story we will share once the boat is repaired) and had to be hauled out. Once she was hauled out, we became homeless because Marina Pez Vela does not allow live aboards on the yard.

The marina arranged a room for us at the Best Western Kamuk at a discounted rate for the first couple of nights.  This was great for the weekend, as they were close to the marina.  But at $68 per night , for 3 months, it would break the already broken bank.

The first three nights we stayed in a small room over a crowded street, but the last night we moved to the top floor which notably had a great view of the beach.

View from Best Western Kamuk Hotel

View from Best Western Kamuk Hotel

The marina connected us with real estate guru, Alvin who showed us a few short term rental properties.  We ended up at Manuel Antonio Estates which offered  AC, wifi, a pool, and a full kitchen. Remarkably, most apartments don’t have ovens.  I have grand plans of baking for our boat workers so an oven was a must have.

We negotiated a lower rate which included all of the utilities, maid service twice a week, and moved in the next day.

Nestled in the trees are 9 apartments overlooking a pool and the dense foliage below.  Once you pass the guard gate, you walk up a hill, past the Rain Drop Spa (top left), to the main reception area (top right).

Then you climb up another hill to the apartment units (2nd row, left) which overlooks the pool.  We have lots of wildlife, including iguanas, geckos, monkeys, toucans, and tons of birds.

Manuel Antonio Estates

Manuel Antonio Estates

The hike up the hill in the heat often requires a dip in the pool to cool off.  With this in mind, it is not a hardship to get home.

Crazy Neighbors

The apartments are located near the Manuel Antonio Park and are nestled in the trees.  So, we have lots of wildlife around.  We’ve seen scarlet macaws fly by and one toucan sighting.  Tons of other birds, lizards, geckos, iguanas, Capuchin monkey family, squirrel monkey family, and even a few dogs and cats.

We get visitors around sunset – they are a playful bunch of monkeys.  Crawling, leaping, jumping all over the place.  The monkeys are so curious, they kept peeking over the roof and hanging from the rain gutters to look at us.  Generally speaking, they are more afraid of us then we are of them.  These are Capuchin monkeys but we also get squirrel monkey family as well.

White Faced Capuchin Monkeys

White Faced Capuchin Monkeys

Waterfall Hike on Property

There is a pretty challenging hike to a small waterfall on the property. The first 1.5 miles is up and down many hills on a paved road.  At the end of the road, make a left at the dirt pile, then right past the tree onto a “water runoff.”  The little, muddy trail down only takes about 30 minutes and you are rewarded with beautiful views, a waterfall, and a refreshing body of water.

Manuel Antonio Estates Cascadas

Manuel Antonio Estates Cascadas

Movers and Shakers

We have moved around a lot at Manuel Antonio Estates.  We started in unit 8 which is on the top floor.  After about 5 weeks we had to move to unit 5.  The top units have a better view, more ventilation and direct sun so they can rent them easier than the other units.  However, we found unit 5 to be just as fabulous.  We stayed in this 2nd unit for about a month when we decided we wanted to move to unit 2.  We had some “unusual” neighbors who smoked a lot on their patio and we wanted to move further away (plus unit 2 had a bigger couch).  As Manuel Antonio Estates busy season came to an end more units opened up.  So, after about a month we were offered unit 7 which is back on the top floor.  Sweet.  Great views from here with a cool breeze.

View from Unit 7 at Manuel Antonio Estates

View from Unit 7 at Manuel Antonio Estates

They were doing maintenance on the pool which is why it is only 1/2 full but normally it is a fabulous place to cool off.

We love our team at Manuel Antonio Estates!  Dorit is an amazing property manager handling everything from repairs, rental cars, tours, and local advice.  Giselle and Reina keep all the apartments clean and comfortable and Tariq runs a smooth operation.  Thank all for making us feel welcome and at home!

Completed fender covers.

Dressing Up Our Fenders

Every boat has fenders, so what makes them special?  Sugar Shack came with lots of fenders – really big ones!  It’s always good to have solid fenders and the bigger the better.  Fenders are used when entering a marina, pulling up to a dock, and any time you need protection for your boat.  We’ve pulled them out when a boat was dragging and coming down on us, we’ve used them for fun and games (think “wrecking ball” when you see image below).

Wrecking Ball on the Seas.

Wrecking Ball on the Seas.

In San Blas, we have 3 fenders out on the side of the boat so the pangas, ulus and dugouts don’t damage our boat when they come to sell us fruits, veggies, lobster, and molas.

The fenders have been working great and have protected our hulls from many potential impacts.  However, as the fenders get used, they get dirty.  When they are dirty, they transfer that dirt and other marks onto the hulls.  Which sucks.  So, we have been meaning to do fender covers for a very long time. Matt purchased and brought 50’ of blue fleece over 6 years ago along with two more large fenders.  The felt has sat under our master bed ever since.

Until, I got a bug up my butt and decided to do something about it! Matt and I worked on several patterns for the A4 fender which are giant balls (well, funny shaped balls).  We have 4-A4’s and 1-A5.  Many months ago, we tried our hand at making a fender cover using old sunbrella for the A5.  And, although it works, it is hideous.

A5 ugly fender cover attempt #1

A5 ugly fender cover attempt #1

We learned several things, sunbrella sucks as a fender cover, and our measurements were way off.  So, the key was in the pattern.  We made several patterns using shower curtains.  They are cheap, easy to draw on, cut quickly, can be stapled, and gently manhandled into a form.  Unfortunately, it took us a few tries to get what we thought was a decent pattern.  We wrapped it around our A4 and then went to work with the fabric.

First, tracing the pattern on the fabric.  Traced the larger pattern which has the ½” hem and then traced the actual panel inside.

After cutting the fabric, we sowed the panels side to side forming a giant circle.  Then the top and bottom hems were sewed.  We placed the cover, inside out over the ball.  It was close, worked, but not tight enough.  So, we pinned each seam making the cover form fitting, took it off, sewed it up and voila.

A4 Pattern and final product.

A4 Pattern and final product.

Since the first one was so big, we decided to make a new, smaller pattern.  Each ball has 6 panels and there are 4 balls.  With each fender, the covers got better and better.  The 4th ball is on the side of the boat for the pangas.

Once the hard covers are done, we moved on to the “easy” F4s which are tubes for lack of a better description.  Super easy.

We cut 28”x27” piece of fabric (almost a square), hemmed the top and bottom.  Then we wrapped it on the fender, inside out so we could pin the final edge.

Gently scoot the fabric off without popping the pins, then sew her up.  You want them to fit like a glove so that they don’t slip off during use.  Once the cover was completed, we had to squeeze it over the fender – it was very much like putting something on over something unmentionable….

F4 Covers Complete

F4 Covers Complete

The four A4s and eight F4s look great and are now well protected.  The only unfortunate thing is that we ran out of fabric before I could cover the last remaining A5 which happens to be the largest fender and the one we use the most ☹

Instead of enduring the ugly A5 with dirty sunbrella, I decided to use blue sunbrella scraps to make a new A5 cover.  It would not be the same as the others, but it will be closer in color and look a lot better – or so I had hoped.

The sunbrella fabric is not as forgiving as the fleece and does not “mold” to the round shape of the fender well.  However, I was determined. I did my measurements, added 2” and went to work.  Cut out 6 panels, pinned then sewed the sides and tried her on.  Hmph….too short, it did not reach all the way around.  No problem, I added another panel.  Tried again and it fit all the way around.  Good news.  I sewed the top and bottom hem, turned it inside out to try on again, and YUCK.

Matt jumped in as I was on the verge of panic and adjusted it a little.  Several side seams needed to be taken in and then it looked rather good.  But, in order to take in the side seams I had to take out the top and bottom seams (for Pete’s sake!).  So, I removed the top and bottom seams, sewed my new side seams, resewed the top and bottom seams and it is what it is.

A5 Complete

A5 Complete

Boat project: Fender covers complete!

Completed fender covers.

Completed fender covers.

Useful, yet unusual helpful sewing items:

  • Shower curtains for patterns
  • Chalk for outline
  • Binder clips to hold material